Then, connect your phone, tablet or laptop to the Wall Connector. On your phone, under Settings, locate and select the Wall Connector’s Wi-Fi named TeslaWallConnector_XXXXXX. Step 3: Using your phone, find and select the Wall Connector's Wi-Fi network. After the power cycle or button press above is completed, the Wall Connector will display a pulsing green LED and broadcast its own Wi-Fi access point for up to fifteen minutes, depending on the firmware version. Step 2: Ensure Wall Connector is broadcasting.įor the entirety of this process, stand next to your Wall Connector. Once all the lights turn on, you can release the button. If the circuit breaker is not accessible, press and hold the cable handle button for five seconds to prompt the Wall Connector to broadcast its Wi-Fi signal. During this time, note the amperage for the breaker your electrician has installed for the unit. Go to your circuit breaker panel and turn off the breaker for five seconds. Step 1: Prompt your Wall Connector to broadcast its Wi-Fi signal. Keep your Wall Connector unplugged from your vehicle throughout the entire commissioning process.
Note: Before following the steps below, have your home Wi-Fi network password ready and ensure your Wall Connector is unplugged from your vehicle. The first step for all troubleshooting is to ensure your Gen 3 Wall Connector is commissioned correctly so that it can charge properly and download the most recent firmware for the best performance and latest features.
Gen 3 Wall Connectors automatically receive firmware updates when connected to Wi-Fi.
0 kommentar(er)
